湖州恒鑫过滤科技有限公司

1、过滤器采用FRP材质，部件一次成型， 标准化生产，更换、维修方便。

· 2、过滤器进出水口连接有4"coupling,拆装方便，视觉美观、整齐。

· 3、过滤器采用上部进水，滤芯受冲击阻力小;顶部装有排气阀，便于过滤器中空气排出。

· 4、过滤器底部系统与顶部滤芯定位压紧板均采用一-体式设计，滤芯的安装并压紧既容易又可避免内漏现象。

· 5、过滤器封盖与本体连接采用吊环螺丝法兰式密封，既确保过滤器完好的密封性能，又给更换滤芯的拆装带来了方便和快捷且使过滤器能承受更大压力。

· 6、过滤器为FRP材质成型,具有较强的耐腐蚀性，能用于不锈钢不能代替的化工行业及海水淡化领域。

· 1.All the parts of this series filters are made of FRP material.

· 2.The inlet and outlet , which connected with the pipe is adopt a 4" coupling.

· 3.The distribution system of HPCF filters is distributed from top.Water is well-proportioned with small strike to cartridges and air is easy to be discharged.

· 4.The bottom system of HPCF filter is designed together as a whole with the top localizer & closure system.Cartridges are easy to be installed, push down and closed, preventing leaking inside.

· 5.The lid and the body are connected using eyebolts flange method, Ensure a good seal performance. and ensure the filter can stand higher pressure.

· 6.HPCF filter is corrosion resistant, It can be used in SS none- replace field, and seawater treatment field

· 本信息由湖州永拓发布